Navneet Metal Corporation is a experienced manufacturer & trader of ASTM B408 Incoloy 800H Round Bars, which have the same composition as Incoloy 800 Round Bars a nickel-iron-chromium alloy. At any rate, ASTM B408 Incoloy 800H Bars have an ideal block over creep break that showed up contrastingly according to Incoloy 800 Bars. These ASTM B408 Incoloy 800H Bars have the general compound individual yet for the movements in carbon, titanium, and aluminium totals. ASME SB408 Alloy 800H Round Bars are utilised to fill the need for a power- and usage-safe blend with sensibly low nickel content. ASME SB408 Mix 800H Bars are nickel-chromium-iron alloys through stunning opposition and remarkable determination to carburization and oxidation in taking off temperature straightforwardness. The higher strength in ASME SB408 Alloy 800H Posts results from close control of carbon, aluminium, and titanium contents associated with a high temperature sustain.

Incoloy 800H Round Bars Stockists and Suppliers in India and Gulf | Navneet Metal Corp

Incoloy 800H Round Bars, Incoloy 800H Round Bars Manufacturers, Incoloy 800H Round Bars Suppliers, Incoloy 800H Round Bars Stockists, Incoloy 800H Round Bars Exporters

Incoloy 800H Round Bars In India, Incoloy 800H Round Bars Manufacturers In India, Incoloy 800H Round Bars Suppliers In India, Incoloy 800H Round Bars Stockists In India, Incoloy 800H Round Bars Exporters In India

ASTM B408 Inconel 800H Round Bars are a reaction heat processed with metallic material with a restricted carbon content than Inconel 800 Round Bars. In the interim, the ASTM B408 Inconel 800H Bars change was to control carbon and grain size to streamline pressure burst properties. ASTM B408 Inconel 800H Bars has further changes as per the unified titanium and aluminium levels to guarantee ideal high-temperature properties. ASTM B408 Inconel UNS N08810 Bars offer unprecedented obstruction in the course of action of acidic and sulphur-containing media, where the mix of warm and mechanical management awards this blend to remain in ideal loads as looked at over common alloys.

Incoloy 800H Round Bars In Mumbai, Incoloy 800H Round Bars Manufacturers in Mumbai, Incoloy 800H Round Bars Suppliers in Mumbai, Incoloy 800H Round Bars Stockists in Mumbai, Incoloy 800H Round Bars Exporters in Mumbai

Equivalent Grades Incoloy 800H Round Bars

UNS	WERKSTOFF NR.	GOST	AFNOR	JIS	BS	EN	OR
N08810	1.4958 / 1.4876	ЭИ670	Z8NC33-21	NCF 800H	NA 15(H)	X5NiCrAlTi31-20	XH32T

Incoloy 800H Round Bars Specification

Specification	ASTM B 408 / ASME SB 408, AMS 5766
Dimensions	ASTM, ASME and API
size of Round bar	Thickness: 2 milimeter-100 milimeter
size of Flat bar	Width: 10 milimeter - 500 milimeter
size of Flat bar	Dia: 3 milimeter-~800 milimeter
Channel Bars	80 x 40 milimeter- 150 x 75 milimeter section; 5.0 - 6.0 milimeter thickness
size of Angle bar	3* 20* 20 milimeter~12* 100* 100 milimeter
Size of Billet	1/2 - 495 milimeter Diameter
Rectangular Bars Section	3 to 12 milimeter thickness
Form	Round, Rod, T-Bars, Channel Bars, Precision Ground Bars, Flat Bars, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Threaded, Hex (A/F), Rectangle, Half Round Bars, Profiles, Billet, Ingot, Forging, I/H Bars etc.
Size of Rectangles	33 x 30 milimeter - 295 x 1066 milimeter
Surface	Bright, Hot Rolled Pickled, Hairline, Cold Drawn, Sand Blasting Finished, Polished
Processing	cutting to 650 milimeter
Hollow Bars sizes	32mm Outside diameter x 16 milimeter Inside diameter to 250 milimeter Outside diameter x 200 milimeter Inside diameter)
Tolerance	H9, K9, H8, H12, K12, H11, H13, K10, K11, H10, or as per need
Finish	centreless ground, smooth turned, peeled, hot rolled, Rough Turned, Polish, Bright, Cold (bright) drawn, Centreless Ground, Grinding & Black, hot rolled annealed
Method	Cold Drawn, Hot Rolled, Cold Rolled Rod, Forged Round Bars
Condition	annealed, tempered and Hardened

Chemical Composition of Incoloy 800H Round Bars

Ni	Cr	Fe	Si	Ti	Cu	Mn	C	S	Al
30.0-35.0	19.0-23.0	39.5 min	1.0 max	0.15-0.60	0.75 max	1.5 max	0.05-0.1	0.015 max	0.15-0.60

Mechanical Properties of Incoloy 800H Round Bars

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.94 g/cm3	1350-1400 °C	Psi – 75,000 , MPa – 500	Psi – 30,000 , MPa – 200	30 - 35 %

DOMESTIC AREA

Mumbai	Ahmedabad	Bhopal	Bikaner	Pune
Delhi	Chennai	Visakhapatnam	Mangalore	Nagpur
Bangalore	Kolkata	Siliguri	Assam	Indore
Hyderabad	Surat	Nashik	Cochin	Thane
Faridabad	Rajkot	Aurangabad	Bhavnagar	Ranchi
Coimbatore	Mysore	Salem	Tirupur	Bikaner
Raipur	Bhubaneswar	Bhilai	Ankleshwar	Bhiwandi
Vadodra	Kochi

People Also Search

Incoloy 800H Round Bars, Incoloy 800H Round Bars Manufacturers, Incoloy 800H Round Bars Suppliers, Incoloy 800H Round Bars Stockists, Incoloy 800H Round Bars Exporters, Incoloy 800H Round Bars In India, Incoloy 800H Round Bars Manufacturers in India, Incoloy 800H Round Bars Suppliers in India, Incoloy 800H Round Bars Stockists in India, Incoloy 800H Round Bars Exporters in India, Incoloy 800H Round Bars In Mumbai, Incoloy 800H Round Bars Manufacturers in Mumbai, Incoloy 800H Round Bars Suppliers in Mumbai, Incoloy 800H Round Bars Stockists in Mumbai, Incoloy 800H Round Bars Exporters in Mumbai